Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterHow Much Does Mold Remediation Cost in Los Angeles?
Mold remediation in Los Angeles typically costs between $1,200 and $6,800 for most homes, with the average single-room job landing around $2,400. Small patches under 10 square feet often run $350 to $800, while whole-home or post-flood remediation with reconstruction can reach $12,000 or more. The final number depends on how far the mold has spread, what material it has grown into, and whether the moisture source has been fixed.
If you’ve found mold, you’re probably dealing with two problems at once: the mold remediation itself and the water that fed it. Both need to be handled. We’ve been doing this work since 2005 as part of the Threshold Group family of restoration companies, and we’ve learned that the fastest way to put a homeowner at ease is to give them a real price before anyone touches a wall.
Key Takeaways
- Most Los Angeles mold jobs fall between $1,200 and $6,800.
- Attic mold in older San Fernando Valley homes is one of our most common calls, often triggered by poor ventilation during the dry season.
- Every Marsh job gets a written price before work starts and a 365-Day Done Right Promise on the repair.
- A live person answers our line 24/7, including holidays – not a voicemail queue.
Mold Remediation Cost Breakdown (2026)
Here’s how the pricing typically breaks down for a Los Angeles residential job. These are real ranges for our market, not national averages pulled from somewhere else.
| Line Item | Typical Price Range |
|---|---|
| Initial inspection & moisture mapping | $150 – $500 (often credited toward the job) |
| Air quality testing / lab sample | $250 – $600 per sample set |
| Containment setup (plastic barriers, negative air) | $300 – $900 |
| Mold removal – surface (drywall, tile, framing) | $500 – $2,500 |
| Mold removal – structural (subfloor, joists, studs) | $1,500 – $5,000+ |
| HEPA vacuuming & antimicrobial treatment | $400 – $1,200 |
| Drywall / material removal & disposal | $600 – $2,500 |
| Drying equipment (when moisture remains) | $500 – $2,000 |
| Reconstruction (drywall, paint, trim) | $800 – $4,000+ |
A one-room job in a Koreatown apartment with a small bathroom mold patch might come in at $1,400 all-in. A Santa Monica house with mold behind the kitchen cabinets after a slow supply-line leak could hit $7,000 once cabinets, drywall, and drying are factored in. The spread is wide because the work is genuinely different job to job.
What drives the price up? Access, extent, and material. If we have to open a ceiling to reach mold in a joist cavity, that’s labor and reconstruction. If the mold has moved into drywall paper (which is porous, so it holds spores), the drywall comes out rather than being cleaned. If we find that the moisture source is still active – a dripping line, a leaky roof, poor ventilation – that gets addressed first, or the mold returns.
What keeps it lower? Catching it early. Surface mold on a shower tile joint or window frame is a much smaller job than mold that’s been growing behind the baseboard for six months. For a closer look at what the full process involves, see our Mold Remediation in Los Angeles service page.
What Affects Mold Remediation Pricing in Los Angeles
- Extent of growth. Under 10 square feet is a small job. Over 100 square feet usually means containment, negative air machines, and material removal – which changes the price substantially.
- Material type. Non-porous surfaces like tile, metal, and sealed concrete can be cleaned. Porous materials (drywall, ceiling tiles, insulation, wood framing) usually have to be removed and replaced.
- Location in the home. Attic and crawlspace work costs more because of access, heat, and confined-space protocols. In LA’s older Craftsman and Spanish-style homes, attic ventilation issues and flat roofs are frequent culprits.
- Home age and construction. A 1920s bungalow in Angelino Heights has different framing and materials than a 2015 build in Downtown. Plaster walls, old plumbing, and unvented attics all change the scope.
- Hidden moisture. Sometimes the visible mold is 20% of the problem. We use moisture meters and thermal imaging to find the rest. LA’s dry climate doesn’t stop mold – it just hides the water source longer, especially after a slow leak under a slab or behind a vanity.
- Reconstruction needs. Remediation removes material. Reconstruction puts it back. Some companies quote only one; we quote both.
One thing that’s specific to Los Angeles: wildfire season. After a fire, smoke and ash can settle into a home, and if any moisture gets introduced – from firefighting water or a roof leak – mold can develop quickly in the ash layer. We see this pattern in the foothill neighborhoods around Altadena, La Cañada, and the Santa Monica Mountains. It’s a distinct job type, and it prices differently than a standard leak.
How to Save on Mold Remediation
The single biggest cost saver is fixing the moisture source before remediation. If we remove mold and the pipe still drips, the mold comes back. Here’s what actually works:
- Find and fix the water first. A $200 plumbing repair can prevent a $6,000 mold job from recurring.
- Act on visible mold quickly. A 2-square-foot patch is a $400 job. Wait three months and it becomes a $3,000 job.
- Check your insurance. Mold from a sudden, accidental water event (burst pipe, appliance failure) is often covered. Mold from long-term neglect usually isn’t. Knowing which category you’re in matters.
- Get a written, itemized quote. A range without line items is a guess. We put the price on paper before work begins, and it doesn’t balloon after demo starts.
- Ask about the guarantee. Our 365-Day Done Right Promise means if the repair fails within a year, we come back and fix it at no cost. That’s a second visit included, not argued over.
The best way to know your actual number is to have someone look. Estimates are free, and we’ll tell you what we see. Call (910) 613-6568.
FAQs – Mold Remediation Cost
How much does mold remediation cost in Los Angeles?
Most Los Angeles homeowners pay between $1,200 and $6,800, with a typical single-room job around $2,400. Small surface mold under 10 square feet runs $350 to $800. Whole-home or post-flood jobs with reconstruction can exceed $12,000. Call (910) 613-6568 for a free, written estimate specific to your property.
Does homeowners insurance cover mold remediation in Los Angeles?
Yes, in many cases, if the mold resulted from a covered event like a burst pipe or appliance failure. Coverage typically ranges from $10,000 to $50,000 depending on your policy. Mold from ongoing leaks, humidity, or neglect is usually excluded. Call (910) 613-6568 and we’ll walk through what your situation likely falls under.
How long does mold remediation take, and does time affect the cost?
Most residential jobs take 2 to 5 days. Small jobs can finish in a single day. Longer jobs cost more mainly due to equipment rental (air scrubbers, dehumidifiers) running $50 to $150 per day per unit. Call (910) 613-6568 for a timeline and price for your home.
Is it cheaper to clean mold myself or hire a professional?
For surface mold on non-porous material under about 10 square feet, DIY cleaning can work and costs $50 to $150 in supplies. Beyond that, professional remediation at $1,200 to $6,800 is usually cheaper than the health and structural consequences of an incomplete job. Disturbing mold without containment spreads spores. Call (910) 613-6568 if you’re unsure which category you’re in.
Why are mold remediation prices in Los Angeles higher than in some other cities?
Labor rates, disposal fees, and permitting costs in LA County run 15% to 30% higher than the national average, and older housing stock often means more hidden moisture. Industry-standard equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry is used on every job. Call (910) 613-6568 for an exact quote.
Who will show up at my door?
Every Marsh technician is background-checked, identity-verified, and sent to you by name and photo before the visit – then shows a photo ID badge at the door. This is the Threshold Standard, and it applies to every visit. Call (910) 613-6568 to schedule.
Why Homeowners Choose Marsh
We’re the restoration brand of the Threshold Group family, independently owned and operated under the Threshold Verified standard. That means our technicians are credentialed through IICRC, RIA, and IFA – the restoration industry’s recognized training bodies – and operate commercial-grade drying and extraction equipment. Every job gets a written price before any work begins, a written guarantee on the repair, and a live person on the phone 24/7, not a callback system.
Mold is a water problem wearing a disguise. If you fix the water and remove the mold correctly, it stays gone. If you don’t, it comes back. That’s the whole job, and it’s what we do. For water damage that hasn’t yet turned into mold, our home restoration team can help there too.
Call (910) 613-6568 for a free estimate. A live person answers, day or night.
Pricing reflects the Los Angeles market as of 2026. Marsh Water Damage Restoration offers free estimates – call (910) 613-6568. Written by Tobias Reyner, Owner at Marsh Water Damage Restoration, serving Los Angeles since 2005.
What Our Customers Say
"Knowing the techs were background checked was a big deal with them working in our home for days. Respectful and careful with our belongings."
- Priya S."Washing machine hose burst while we were out. The crew arrived with badges, set up fans and dehumidifiers, and checked the wall cavities with a moisture meter. Floors were dry in four days."
- Colleen A."Clear communication about what insurance would cover and what wouldn't. Never felt pushed."
- Oscar P.