Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterHow Much Does Damage Restoration Cost in The Bronx?
Most damage restoration jobs in The Bronx run between $1,800 and $8,500, with the typical single-family home landing around $3,400 for water extraction, structural drying, and basic repairs. Small contained losses – a supply line under a kitchen sink in Concourse, say – can finish under $1,200, while a burst riser that soaks two floors of a Fordham walk-up can climb past $15,000 once walls, floors, and ceilings are opened. Mold remediation sits in its own lane at roughly $1,500 to $6,000 depending on how much square footage is affected and whether the growth is behind the walls.
We’ve been pricing these jobs in The Bronx since 2005, and the honest answer is that no two are identical. What we can promise is a written price before any work starts, so the number you agree to is the number you pay.
Key Takeaways
- Water extraction alone usually costs $450 to $1,400 before drying equipment is set.
- Structural drying (the fans and dehumidifiers) adds $900 to $3,200 for a typical Bronx apartment or home.
- Mold remediation averages $1,500 to $6,000; crawlspace and basement work trends higher.
- Insurance often covers a large share – your out-of-pocket is frequently the deductible plus anything past your policy cap.
- Every job gets a written price, a written guarantee, and our 365-Day Done Right Promise on the repair.
Damage Restoration Cost Breakdown (2026)
Here’s what these line items actually cost in The Bronx this year. Prices reflect real jobs, not national averages pulled from a database.
| Service | Typical Bronx Range | Notes |
|---|---|---|
| Water extraction (standing water removal) | $450 – $1,400 | Higher for flooded basements and multiple rooms |
| Structural drying (air movers + dehumidifiers) | $900 – $3,200 | 3 to 5 days typical; longer for pre-war masonry |
| Psychrometric monitoring (moisture-in-air readings) | Included in drying | Daily readings confirm the structure is genuinely dry |
| Mold remediation | $1,500 – $6,000 | Based on affected square footage, not room count |
| Antimicrobial treatment | $200 – $750 | Applied after extraction, before drying |
| Drywall removal and replacement | $600 – $2,800 | Cut-and-remove is cheaper than cut-and-replace |
| Flooring (hardwood dry-out or replacement) | $800 – $4,500 | Refinishing beats replacement where boards survive |
| Sewage backup cleanup (Category 3 water) | $2,500 – $9,000 | Requires full disinfection and often discarded materials |
| Storm damage board-up and tarping | $400 – $1,600 | Common after nor’easters and summer microbursts |
| Reconstruction and drywall finishing | $1,200 – $6,000+ | Scoped after drying is verified complete |
What pushes a job toward the high end? The water category matters more than anything. Clean water from a supply line is the cheapest to handle. Greywater from a washing machine or dishwasher steps up a tier. Black water – sewage backups, river flooding, or anything that’s sat for days – requires discarding porous materials and disinfecting everything, which is where costs climb fastest. The second biggest driver is how long the water sat before anyone called. A leak caught the same morning is a drying job. The same leak discovered a week later is a mold remediation job with reconstruction attached.
Access is the third driver, and it’s pure Bronx. A ground-floor apartment off Arthur Avenue is straightforward. A fifth-floor walk-up near Grand Concourse means every extractor, air mover, and dehumidifier gets carried up the stairs, and that labor shows up in the price. We’d rather tell you that upfront than surprise you with it after demo.
What Affects Damage Restoration Pricing in The Bronx
Six factors move the number more than anything else:
- Water category and class. Category 1 (clean) is cheapest, Category 3 (black water) is the most expensive. Class refers to how much of the structure is wet, from Class 1 (a small area) to Class 4 (deeply saturated materials like hardwood, plaster, and concrete).
- Building age and construction. Bronx pre-war buildings use plaster and lath rather than drywall, and plaster releases moisture far more slowly. We’ve seen plaster walls in Mott Haven still reading wet on a moisture meter nine days into drying when drywall in a newer building would be dry in three.
- Floor count and access. Walk-ups, basement units with no direct outside entry, and buildings with no freight elevator all add handling time. It’s real cost, not padding.
- Mold presence. If mold has already colonized – which it can do in 24 to 48 hours in a warm, humid Bronx summer – the job adds remediation on top of drying.
- Insurance coverage. Most homeowner and renter policies in the Bronx cover sudden water damage, and many cover mold remediation up to a sublimit. We document everything for the adjuster so the claim stands up.
- What gets rebuilt. Extraction and drying stop the damage; reconstruction restores the room. Some homeowners handle painting and trim themselves to save. We don’t push reconstruction you don’t need.
One local pattern worth knowing: in Norwood and Bedford Park, we regularly see basement seepage after heavy spring rain pushing against old foundation walls – the kind of slow intrusion that never triggers a dramatic call but quietly feeds mold all summer. Catching it in April is a $1,500 drying job. Catching it in September is a $6,000 remediation.
What to Expect on the Job: A 5-Step Walkthrough
Knowing the sequence tells you where your money goes:
- Assessment and written price. We read moisture levels with meters and thermal imaging, identify the water category, and hand you a written price before a single machine comes off the truck. No estimate that balloons after demo begins.
- Water extraction. Truck-mounted and portable extractors pull standing water out of carpet, subfloor, and any low spots. This is the line item most people see first on the invoice.
- Drying and dehumidification. We set Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry equipment to dry the air and the structure together. Psychrometric readings (measuring the moisture in the air) tell us when the structure is genuinely dry – not just dry to the touch on the surface.
- Antimicrobial and mold remediation, if needed. Applied after extraction, before or during drying depending on what we find. Microbial remediation just means removing mold growth and treating the area so it doesn’t return.
- Repairs and verification. Drywall, flooring, and paint are restored, then we verify with moisture readings before calling the job done. Every repair carries our 365-Day Done Right Promise – if something isn’t right within a full year, we make it right, and the second visit is free.
Before we ever get there, you’ll know who’s coming. Every technician is background-checked, identity-verified, and sent to you by name and photo before the visit – the Threshold Verified standard. They show a photo ID badge at the door, every time. If you’re home alone, have young kids, or just don’t like opening your door to strangers, that matters. It’s why we built the standard in the first place.
How to Save on Damage Restoration
The single biggest saving is calling early. Water damage compounds the way interest does – every day it sits, the repair grows. A $900 extraction today beats a $7,000 remediation next month, and that’s not a sales line, it’s just how the physics works.
- Call before you demo. A homeowner who rips out their own drywall before we arrive often creates more work, not less. Let us document the moisture first for your claim.
- Use your insurance. File the claim. We work with adjusters directly and provide the photo and moisture documentation they need.
- Handle the finishing touches yourself if you want. If you’re comfortable painting and trimming, that trims the reconstruction line.
- Ask about the free estimate. Call (910) 613-6568 and we’ll price the job in writing before anything gets touched.
We keep the same professional-grade equipment on residential jobs that we’d deploy on a commercial loss, so small jobs get done right the first time. That’s cheaper than doing it twice.
FAQs – Damage Restoration Cost
How much does water damage restoration cost in The Bronx?
Most Bronx water damage jobs cost between $1,800 and $8,500, with a typical single-family home around $3,400 for extraction, drying, and basic repairs. Sewage backups and multi-floor losses run higher. Call (910) 613-6568 for an exact quote – estimates are free.
Is it cheaper to repair or replace water-damaged flooring?
Refinishing is usually cheaper when the boards survive – roughly $800 to $2,200 versus $2,500 to $4,500 for full replacement. If hardwood is still wet but not warped or cupped, we dry it in place and refinish. If it’s already buckling, replacement is the honest answer. Call us and we’ll tell you which before you spend anything.
Does homeowners insurance cover water damage restoration in The Bronx?
Usually yes, for sudden and accidental damage – a burst pipe, a failed water heater, an appliance leak. Most policies cover extraction, drying, and repairs up to your coverage limit, and many include mold remediation up to a sublimit. Flood water from outside is a separate policy. Your out-of-pocket is typically the deductible. Call (910) 613-6568 and we’ll help you document the loss for your adjuster.
How much does mold remediation cost in The Bronx?
Most mold remediation jobs in The Bronx cost between $1,500 and $6,000, based on the affected square footage. Crawlspaces and basements trend toward the top of that range because they’re harder to access and dry. Left untreated, mold spreads and the cost grows with it – call (910) 613-6568 for a free inspection.
Can you come today and give me a price before you start?
Yes to both. We answer every call with a live person 24/7, including holidays, and same-day response is normal across The Bronx. Every job gets a written price before any work begins – no estimate that changes after demo starts. Call (910) 613-6568 now and we’ll walk you through it.
Pricing reflects the The Bronx market as of 2026. Marsh Water Damage Restoration offers free estimates – call (910) 613-6568.
Written by Tobias Reyner, Owner at Marsh Water Damage Restoration, serving The Bronx since 2005.
What Our Customers Say
"Knowing the techs were background checked was a big deal with them working in our home for days. Respectful and careful with our belongings."
- Priya S."Washing machine hose burst while we were out. The crew arrived with badges, set up fans and dehumidifiers, and checked the wall cavities with a moisture meter. Floors were dry in four days."
- Colleen A."Clear communication about what insurance would cover and what wouldn't. Never felt pushed."
- Oscar P.