Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Hudson
Mold remediation in Hudson, NY typically costs $1,800 to $6,500 for a standard single-room containment and removal, with full attached-row party-wall jobs running higher because two units often share one scope. Most Hudson jobs can be assessed within 24 hours of your call, and we answer live around the clock at (910) 613-6568. Hudson’s 1800 – 1880 attached rows and riverside humidity create mold problems that box-store fixes cannot touch, which is why our crews know Warren Street’s commercial blocks, the 200-block rows off Union, and the steep-pitched Greek Revivals near the river the same way a local plumber knows the shutoff valves.
Why Marsh Water Damage Restoration Is Hudson’s Preferred Mold Remediation Company
Hudson homeowners call us because we do not treat a row-house mold loss as a one-unit job. The single-wythe brick party walls in Federal, Greek Revival, and Italianate blocks have no true fire-stop separation, so moisture wicks sideways before it ever shows itself as a stain on your side. We have worked those shared-wall situations enough times to build containment on both sides of a wall before we cut one inch of lath. That is not standard mold-company protocol; it is the only protocol that keeps the job from coming back in your neighbor’s plaster three weeks later.
Every Marsh technician who steps onto a Hudson sidewalk is background-checked, identity-verified, and sent to you by name and photo before the visit, then shows a photo ID badge at the door. Tobias Reyner, who leads our restoration team, built this protocol because the second fear our customers carry, right behind the mold itself, is the stranger at the door. We are in business since 2005 as part of the Threshold Group family, and the Threshold Standard applies to every single visit. Not a credential we flash once. A printed checklist on every work order.
Our Mold Remediation crews arrive in Hudson with the same Dri-Eaz, Phoenix, and XPOWER drying equipment we run on large commercial losses. IICRC, RIA, and IFA credentialed. A written price before any work starts, a written guarantee on every repair, and a 365-Day Done Right Promise printed on the work order, not buried in a binder nobody reads.
Black Mold Removal in Hudson
Black Mold Removal in Hudson is the service we run most often in attached row-house blocks south of Warren Street, where a roof or ice-dam leak in one unit silently feeds the lath, plaster, and wide-board pine subfloor in the one next to it. The job means full containment chambers under negative air, HEPA-filtered air scrubbers, removal of mold-saturated plaster and lath, and structural drying down to dry-standard moisture content, then SHPO-compliant rebuilding with lime plaster and original-profile materials where the historic district requires it. Most single-room black mold removals in Hudson run $2,200 to $5,800. Party-wall jobs that cross into a neighboring unit start around $4,500 and rise with the size of the shared-wall surface and how many insurers are in the claim.
Containment in Attached Rows
In Hudson’s attached housing stock, containment on your side alone is not enough. We run negative air and 6-mil poly on both sides of the shared wall when moisture readings show wicking into the neighboring unit, because mold spores travel through single-wythe brick the way water does. The two-owner, two-adjuster coordination adds time and paperwork, but skipping it means the bloom returns in your neighbor’s wall and the whole claim gets reopened.
Historic Plaster and Lath Removal
Black mold penetrated deep into horsehair plaster and hand-nailed lath cannot be “killed” with a surface spray and repainted. In Hudson, we remove the affected lath and plaster in clean, square cuts, dry the wall cavity, and rebuild with lime plaster and period-appropriate trim when SHPO or the local historic district commission requires it. Modern drywall over a partially dried historic wall is the most common re-do we see on other companies’ prior work.
Mold Removal Contractor in Hudson
A Mold Removal Contractor in Hudson has to know the difference between a modern sheetrock stud wall and an 1830s masonry-and-lath assembly, because the two dry at very different rates and fail in very different ways. Our Hudson jobs start with a visual inspection, moisture mapping, and where the scope warrants, air and surface sampling sent to a third-party lab. We run Injectidry drying mats on wide-board pine floors, Dri-Eaz and Phoenix dehumidifiers on the room air, and XPOWER air movers where the wall cavity can be accessed without disturbing historic finishes. A typical single-unit mold removal in Hudson’s detached Victorians runs $1,800 to $4,200; attached row-house remeidation with party-wall drying runs $3,500 to $7,500 or more depending on how far the moisture has traveled.
Drying the Wide-Board Pine and Lath
Legacy wide-board pine and hand-plastered lath release moisture from the back side first, so surface readings often look dry when the wall cavity is still at a mold-friendly 22% moisture content or higher. We map moisture daily, not once at the start, and we do not call a Hudson job done until readings taken against the masonry or brick substrate hold below the dry standard. Rushing this step is exactly how hidden mold returns behind a freshly skimmed wall.
When a Full Wall Has to Come Out
If mold has covered more than 30 square feet of lath and plaster, or has penetrated into the furring strips and the brick itself, cleaning alone is not worth doing. We cut the affected section out, dispose of it as contaminated material, dry the masonry, and rebuild. In Hudson’s historic districts, that rebuild is lime plaster and original-profile moldings, not blueboard and latex, which keeps the SHPO application moving and protects your home’s value.
Trusted Brands We Service in Hudson
Our drying floors in Hudson run Dri-Eaz dehumidifiers and Phoenix units matched to the square footage of each room, with XPOWER air movers positioned for wall-cavity drying on the shared-party-wall sides of a job, and Injectidry mats laid over wide-board pine floors that have to be dried in place because the wood is too valuable to rip out. We stock parts and consumables for these systems locally so a Hudson job does not stall waiting on a freight shipment. The same equipment and standards we use on commercial restoration projects get used on a two-room row-house loss in Hudson. No difference in gear, no difference in documentation.
Common Mold Remediation Problems We See in Hudson Homes
- Single-wythe party-wall wicking. Water from an ice-dam or roof leak in one attached unit moves sideways through the brick and feeds mold on the back of the neighbor’s lath. The job must be scoped as a shared-wall loss from day one, or it comes back.
- Misleading surface moisture readings on legacy plaster over stone or unreinforced brick foundations. These assemblies release moisture from the back side, so a surface meter can read dry while the cavity is still wet enough for mold. We map from the masonry side and hold drying until deep readings are stable.
- Modern drywall patches in a historic row house. Replacing wet lime plaster and lath with modern drywall and latex paint violates SHPO and Hudson historic district standards, and we have seen owners forced to tear out and re-do that work at their own expense.
- Mold in the basement that was never categorized. Hudson’s stone and brick basements see standing water, yard run-off, and old sewage lines mixing. Category 1 water gets treated very differently from Category 2 or 3; skipping that classification pulls a clean-water response into a contaminated loss, and it matters for your insurance claim.
Pricing for Mold Remediation in Hudson, NY
A single-room mold remediation in Hudson runs $1,800 to $4,500. A full attached-row job with party-wall drying and two-unit containment runs $4,000 to $9,500 depending on how many rooms are involved, how far moisture has traveled through the brick, and whether the rebuilding is drywall or SHPO-compliant lime plaster. Air and surface testing adds $300 to $600 when the claim or the historic commission requires it, and we always give you a written price before any work starts, not a range that balloons after demo begins. Call (910) 613-6568 for a free estimate. We will map moisture, inspect the wall cavities, and give you a number you can take to your adjuster the same day.
We Also Serve Cities Near Hudson
Our crews run mold jobs through Hudson and the surrounding towns of Red Hook, Greenville, Kingston, and Rensselaer, so if your property sits just outside the city line or you own multiple buildings across Columbia and Greene counties, one call covers all of it. We schedule Hudson jobs alongside those surrounding routes and can walk a row-house scope in Hudson and a farmhouse scope in Greenville the same afternoon.
Serving Hudson, NY - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Hudson
It is a shared remediation. In Hudson’s attached rows, the single-wythe brick party wall between units has no fire-stop separation, so water and mold do not respect the property line, and both units typically have to be contained and dried as one scope. Each owner files with their own insurer, and we coordinate the two claims, the two adjusters, and the SHPO or historic district permit applications so the wall gets opened once, dried properly, and rebuilt with the right materials for both sides.
If your neighbor’s insurer pushes back, our photo documentation and moisture mapping show exactly where the water traveled, which is usually enough to get both carriers to the same table. Call (910) 613-6568 if you are staring at a shared wall and a musty smell.
It can often be dried in place, but only with the right drying plan. Wide-board pine floors respond well to Injectidry mat drying, and lath-and-plaster walls can be dried from the cavity side when we open the bottom course of plaster and run Phoenix or Dri-Eaz dehumidifiers with XPOWER air movers aimed into the wall cavity. The critical variable is moisture content: if the wood or masonry substrate reads above 20% for more than a few days, or if mold has penetrated the plaster surface deeply, that section has to come out and be rebuilt. We map moisture daily and give you an honest read on what is salvageable and what is not, in writing, before demo starts.
Often yes. If your building is in a Hudson historic district or individually listed, the State Historic Preservation Office and the local historic commission review changes to significant interior finishes, which includes replacement of lath-and-plaster with drywall. We build the remediation scope to comply before we cut, using lime plaster and original-profile moldings where required, so you do not get a re-do order mid-claim. If the mold is a health emergency and cannot wait for a commission meeting, we photo-document everything and file for emergency review while the containment goes up.
In a Hudson winter, the window is tight. Water from an ice dam on a steep-pitched slate or asphalt roof runs down into the wall cavity, and in an 1830s row house with lath and plaster, that moisture is trapped between lime plaster and single-wythe brick. Mold can begin colonizing in 24 to 48 hours if the cavity stays above 60% relative humidity and the temperature inside the wall is mild. By the time a stain shows on your plaster, the back of the lath is usually heavily colonized. If you had an ice dam this winter and smell must, call (910) 613-6568 and we will map the wall that week before the bloom spreads through the party wall.
We classify the water before we touch anything. Category 1 is clean water from a supply line, a rain leak through a broken gutter, or condensation. Category 2 is “gray” water with some contamination, like a washing machine overflow or aquarium leak. Category 3 is sewage, river back-up, or storm water that sat for days with organic material in it. The category drives the whole protocol: what containment we build, what antimicrobial we apply, what materials we dispose of, and how we document the claim. In Hudson’s old stone and brick basements, where sewage lines and storm drains sometimes cross, a professional classification is the difference between a covered loss and a denied claim.
For mold remediation in Hudson, call (910) 613-6568. We answer live around the clock, we send a photo-badged technician by name before the visit, and you get a written price and a written guarantee before any work starts. If your row house, Greek Revival, or riverside property has water behind the walls, do not wait for the musty smell to turn into a full bloom. One call, a real person, and a crew that knows Hudson’s old walls better than most.
Written by Tobias Reyner, Owner at Marsh Water Damage Restoration, serving Hudson and the surrounding Hudson Valley since 2005.