Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across The Bronx
Mold remediation in The Bronx typically costs $1,800 – $6,500 for a standard apartment or single-family home, with NYCHA multi-unit scopes running higher because of the coordination and protection protocols involved. Most jobs we handle take two to five days, not weeks. If you’re staring at black staining on a bathroom ceiling or smelling something musty behind a closet wall, call (910) 613-6568 and a live person will answer, day or night.
We’ve worked in Soundview apartments, Riverdale co-ops, and South Bronx NYCHA towers long enough to know that mold here rarely stays in one apartment. The Bronx’s pre-war brick tenements and mid-century high-rises share plumbing risers, roof tanks, and wall cavities, so moisture moves vertically. That’s why our crews don’t treat a single room as the whole job – they check the unit above, the unit below, and the shared walls before writing a scope. You deserve a crew that understands how these buildings actually behave.
Why Marsh Water Damage Restoration Is The Bronx’s Preferred Mold Remediation Company
We’ve been restoring water and mold damage since 2005, and our Mold Remediation team has spent a lot of that time inside Bronx buildings – NYCHA towers near Mott Haven, six-story walk-ups off the Grand Concourse, and frame houses in Throggs Neck. The work is different here. You’re not always the decision-maker on your own wall. Building management, HPD, and sometimes federal oversight get involved, and the paperwork has to be right before a work order moves.
Every technician who arrives at your door is Threshold Verified: background-checked, identity-verified, and sent to you by name and photo before the visit. When they knock, they show a photo ID badge. No exceptions. That standard matters in The Bronx, where many of our customers are home alone, raising young children, or are older homeowners who want to know exactly who is walking in.
We answer every call with a live person, 24/7. Not a voicemail. Not a chatbot. A person who can dispatch a crew to Pelham Parkway or Hunts Point the same day you call, and who will tell you over the phone what to expect before anyone gets in a truck. Our written price comes before any work starts, and our 365-Day Done Right Promise is printed on every work order: if the remediation is not right within a full year, we make it right. Free second visit included. Automatically.
Mold Removal Contractor in The Bronx
A Mold Removal Contractor in The Bronx does more than cut out stained drywall. In most buildings here, the job starts with finding where the water is still coming from – a leaking radiator valve, a cracked cast-iron waste line, a roof-tank float that never shut off – and then mapping how far the moisture moved before any wall is opened. A standard residential mold removal in The Bronx runs $1,800 – $4,500 when the affected area is contained to one or two rooms. When the mold has spread through a shared wall cavity into adjacent units, the scope and the cost climb accordingly.
Containment and Negative Air Pressure
Before we remove moldy drywall, we seal the work area with plastic sheeting and run HEPA-filtered negative air machines so spores don’t drift into your kitchen or your neighbor’s apartment. In Bronx tenements with plaster-over-lath walls, we cut carefully and remove only what’s actually contaminated, preserving as much of the original wall assembly as we safely can.
Post-Remediation Verification
After the mold is removed and the framing is cleaned, we dry the structure to verified moisture content and perform a visual and moisture check of adjacent units when building access allows. We document everything – photos, moisture readings, drying logs – because in NYCHA buildings and co-ops, the building’s management or insurance carrier will want a written record before they close out the work order.
Bathroom Mold Removal in The Bronx
Bathroom Mold Removal in The Bronx usually starts with a ceiling stain that keeps coming back after the tenant paints over it. In older Bronx apartments, that stain often means the unit above has a slow leak – a failing tub overflow, a seeping shower pan, or a condensation problem in the wet wall behind the toilet. The mold you see is the last step in a chain that started weeks or months earlier. For a standard bathroom mold removal in a Bronx apartment, expect $900 – $2,800 when the damage is localized to the ceiling and one wall cavity.
Shared Wet Walls in Pre-War Tenements
Pre-war Bronx tenements stack bathrooms directly above one another along a shared plumbing riser, which means water from the fifth floor very often ends up in the fourth floor’s bathroom ceiling. We trace that path with moisture meters before we remove anything, so the remediation actually addresses the source instead of just cleaning up the visible stain.
Ventilation and Moisture Control
Many Bronx bathrooms lack exhaust fans or have fans venting into the wall cavity rather than outdoors, which keeps relative humidity high enough to feed mold growth on painted plaster. As part of bathroom mold removal, we can install a properly ducted exhaust fan or recommend a dehumidifier sized to your bathroom’s square footage, so the mold doesn’t come back in three months.
Trusted Brands We Service in The Bronx
We stock parts and supplies from Dri-Eaz, Phoenix, and B-Air, the same commercial drying and air-scrubbing equipment used on large multi-family losses. What that means for a Bronx homeowner or tenant: we don’t wait on a supply house to open before we can set containment and start drying. Our trucks carry the air movers, dehumidifiers, HEPA scrubbers, and antimicrobial solutions needed to begin containment on day one, whether the job is a single bathroom in a Pelham Bay co-op or three floors of stacked units near Yankee Stadium.
Common Mold Remediation Problems We See in The Bronx Homes
- Rooftop water tank float valve failures in NYCHA towers. When the float sticks open, water runs for days and seeps down through wall cavities, often saturating three or four floors before any tenant sees a stain. By the time we arrive, mold colonies are already growing behind the plaster.
- Burst steam risers in pre-war and mid-century buildings. Steam heat runs through cast-iron risers that can be 70 – 100 years old. When one splits during a hard freeze-thaw winter, it sends pressurized steam into enclosed wall chases, creating perfect mold conditions in hours, not days.
- Asbestos pipe insulation and lead paint in pre-1970s stock. Nearly every apartment building in The Bronx built before the 1970s contains asbestos-wrapped pipes and lead-based paint, which means a mandatory asbestos survey and lead-paint protocol must be completed before we can legally remove saturated drywall or flooring.
- Management approval bottlenecks in NYCHA and co-op buildings. In stacked multi-unit buildings, we often can’t begin removals until NYCHA management or the co-op board signs off on the scope. We document loss conditions and moisture mapping thoroughly, so the case file moves through approval instead of stalling while mold continues spreading.
Pricing for Mold Remediation in The Bronx, NY
Here are the numbers we actually quote on Bronx jobs. Bathroom mold removal: $900 – $2,800. Single-room mold remediation: $1,800 – $4,500. Multi-floor NYCHA or co-op scopes with management coordination and mandatory asbestos/lead protocols: $5,000 – $15,000 or more depending on how many units are affected. The factors that move a job from the bottom of that range to the top: how many wall cavities are wet, whether adjacent units are involved, whether asbestos or lead abatement protocols are required, and whether building management or HPD must approve the scope before demolition starts. We write the price down before work begins, and that price does not balloon because we found something extra after the first cut. Call (910) 613-6568 for a free estimate and a written scope.
We Also Serve Cities Near The Bronx
Our Mold Remediation in The Bronx crews also respond to jobs in Brooklyn, Queens, Manhattan, and Staten Island. If you have a rental property in Washington Heights, a co-op in Long Island City, or a multi-family in Crown Heights, the same Threshold Verified technicians and the same written-price commitment apply. Call (910) 613-6568 and tell us where the property is; we’ll tell you when we can be there.
Serving The Bronx, NY - Our Local Coverage Area
We’re based in the The Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in The Bronx
Mold can begin growing within 24 – 48 hours of a steam riser failing, faster if the steam saturates plaster and insulation in a closed wall cavity that never dries. In South Bronx NYCHA towers, a burst riser usually sends hot, wet steam into the wall chase for hours before the leak is even reported, so by the time our crew arrives, the affected cavity has often been wet for one to three days. We use moisture meters and thermal imaging to find the full extent of the wet area before containment begins. If you suspect a riser leak, call (910) 613-6568 that day; the window to limit mold growth is short.
Because NYCHA owns the walls, the plumbing, the risers, and the roof tanks, not the tenant. Opening a wall to remove mold requires a work order and sign-off from NYCHA management before any remediation contractor can legally proceed. Our team documents the loss condition with photos, moisture readings, and a written scope of work, which we submit to NYCHA management and HPD when required, so the job can move through approval without a documentation backlog. If you’re a tenant who sees mold, call us at (910) 613-6568 and we’ll help you understand what NYCHA will need from you to authorize the work.
No. In any Bronx building constructed before the 1970s, an asbestos survey is mandatory before contractors can remove plaster, drywall, pipe insulation, or flooring that may contain asbestos. Lead-paint protocols also apply if the building was painted before 1978. Skipping this step means the job gets shut down by the building or by DEP, and the scope of work is voided. We handle the survey coordination as part of the remediation scope, so you’re not left juggling abatement firms and paperwork on your own.
Category 1 is clean water from a supply line or a broken faucet. Category 2 is gray water that has been contaminated by chemicals or by time spent in contact with building materials – think water from a radiator overflow or a failed water-tank float that has been sitting for two days. Category 3 is black water, which contains sewage, river water, or anything from outside that flooded in. In Bronx buildings with failed roof tanks or steam risers, we’re usually dealing with Category 2 water that has wicked into wall cavities and begun growing mold; that requires antimicrobial treatment of the affected surfaces after the contaminated material is removed. We test and classify the water as part of the initial assessment, and that classification drives the entire scope.
Yes, and for a simple reason: nor’easters push wind-driven rain into masonry cracks and roof penetrations while also causing sudden temperature drops that stress old cast-iron plumbing. A building with steam radiators and original cast-iron waste lines from the 1920s or 1930s will leak at the joints when the building envelope expands and contracts during the storm cycle. That water runs through the wall cavities and pools behind plaster, where mold starts growing unseen. After a major nor’easter, we field calls from Soundview, Throggs Neck, and City Island homeowners who found staining days after the storm passed. Call (910) 613-6568 and we’ll come check the moisture levels before the staining becomes a full-blown remediation job.
Written by Tobias Reyner, Owner at Marsh Water Damage Restoration, serving The Bronx with mold remediation, water damage restoration, and storm damage repair since 2005.